Table of Contents
Advertisement
Example
>>> set eia0_mode twisted-pair
Changing to selected mode.
>>> show eia0_mode
eia0_mode
The options for eg*_mode value are:
Auto
10mbps
10mbps_full_duplex
100mbps
100mbps_full_duplex
1000mbps
1000mbps_full_duplex
* If no Ethernet cable is connected in this mode, the SRM reports a failure:
Error (eib0.0.10.0), No link, auto negotiation did not complete. This is applicable for ei*,
ew*, and eg* device in auto negotiate.
Twisted-Pair
Auto negotiation*
10 Mb half duplex
10 Mb full duplex
100 Mb half duplex
100 Mb full duplex
1000 Mb half duplex
1000 Mb full duplex
Using Firmware
5-45
Advertisement
Table of Contents
Troubleshooting
