Booting Openvms From The Infoserver; Example 3–5 Infoserver Boot - HP AlphaServer TS15 Owner's Manual

3.5

Booting OpenVMS from the InfoServer

You can boot OpenVMS from InfoServer with a LAN device.
designated eg*0, ew*0, or ei*0. The asterisk stands for the adapter ID (a, b, c, and so
on). The following example lists only ei* devices.
The explanation for the following example appears after the example.
Example 3–5 InfoServer Boot
>>> show device
dka0.0.0.8.0
dka100.1.0.8.0
dqa0.0.0.13.0
dva0.0.0.1000.0
eia0.0.0.9.0
eib0.0.0.10.0
pka0.7.0.8.0
pkb0.7.0.108.0
>>>
.
.
.
>>> boot -flags 0,0 -file apb_0731 eia0
(boot eia0.0.0.9.0 -file APB_0731 -flags 0,0)
Trying MOP boot.
.............
Network load complete.
Host name: CALSUN
Host address: aa-00-04-00-a4-4e
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 70400
initializing HWRPB at 2000
initializing page table at 3ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
*TS15 systems have no floppy drive.
3-20 hp AlphaServer TS15 Owner's Guide
DKA0
DKA100
DQA0
*
DVA0
EIA0
EIB0
PKA0
PKB0
The devices are
COMPAQ BF03665A32
COMPAQ BF03665A32
DW-224E
00-02-A5-20-C0-39
00-02-A5-20-C0-3A
SCSI Bus ID 7
SCSI Bus ID 7
3B01
3B01
A.1J