HP AlphaServer TS15 Owner's Manual page 247

A
Alert string, 6-29
APB program, 3-21
ATI Radeon card, installing, 4-32
auto_action environment variable, 3-3
Autoboot, 3-3
B
Baud rate, setting, 5-42
Beep codes, 7-4
Before opening enclosure, 4-2
Boot devices, specifying, 3-5
Boot flags
OpenVMS, 3-8
UNIX, 3-7
Boot options
setting, 3-2
Boot problems, 7-7
boot_file environment variable, 3-6
boot_osflags environment variable, 3-7
Bootable devices
displaying, 2-13
bootdef_dev environment variable, 3-5
Booting a system, 5-16
Booting OpenVMS
from InfoServer, 3-20
from local CD-ROM, 3-18
Booting Tru64 UNIX
from SCSI disk, 3-11
from the network, 3-13
bootp protocol, 3-10
Bus node ID, SCSI, 5-51
Bypass modes, 6-6
C
com*_baud variable, 5-42
Command conventions (RMC), 6-14
Commands
RMC, 6-36
Common components, 1-5
Components
common, 1-5
Configuration
front access storage cage, 1-16
internal storage cage, 1-15
memory, 4-24
system, 1-2
Console devices, 5-54
Console password, 2-18
Console security
setting, 2-17
Console terminal
COM port, 1-17
video card, 1-18
console variable, 5-43
console variable (SRM), 2-3
Console-reported failures, troubleshooting,
7-6
Control panel messages, 2-3
Cover
before opening, 4-2
CPU overview, 1-13
Crash dump, 5-24
Customer installable options, 4-2
D
Desktop system
front access storage cage, 1-4
Device naming, 5-12
SRM, 2-14
Diagnostic LEDs, 7-2
Dial string, 6-29
Dial-in configuration, 6-22
Dial-out alert, 6-26
DIMM slots, 1-12
DIMMs
installing, 4-26
Index
Index-1