HP AlphaServer TS15 Owner's Manual page 85

Network Initial System Load Function
Version 1.2
FUNCTION ID
1 -
2 -
3 -
4 -
5 -
Enter a function ID value:
Enter a function ID Value:
OPTION
ID
1 -
2 -
Enter an Option ID value: 2
Enter a Known Service Name: ALPHA_V73-1_SSB
OpenVMS (TM) Alpha Operating System, Version V7.3-1
Explanation
1. Power up the system. The system stops at the >>> console prompt.
2. Insert the operating system CD-ROM into the CD-ROM drive connected to the
InfoServer.
3. Enter the show device command
device.
4. Enter the boot command and any command-line parameters
example, the device is EIA0. APB_0731 is the file name of the APB program used for
the initial system load (ISL) boot program.
The InfoServer ISL program displays a menu
5. Respond to the menu prompts
For complete instructions on booting OpenVMS from the InfoServer, see the OpenVMS
installation document.
FUNCTION
Display Menu
Help
Choose Service
Select Options
Stop
3
OPTION
Find Services
Enter known Service Name
to determine the unit number of the drive for your
, using the selections shown in this example.
Booting and Installing an Operating System
. In the preceding
.
3-21