Installing A Dimm - HP ProLiant ML30 Gen9 User Manual

• A white DIMM slot indicates the first slot of a channel (2-A, 4-B).
• Memory speed support depends on the type of processor installed. For more information, see the
technical specification of the installed processor.
• The server supports up to 2400 MT/s ECC UDIMMs.
• The server supports up to 64 GB (4x16 GB) UDIMMs.
• The server does not support:
◦ RDIMMs
◦ Non-ECC UDIMMs
• When installing DIMMs:
◦ Populate the DIMM slots in this sequence: 2-A, 4-B, 1-C, 3-D.
◦ Use HPE-qualified UDIMMs.

Installing a DIMM

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Procedure
1. Back up all server data.
2. Power down the server.
3. Disconnect the power cord from the power source and the server.
4. Remove the bezel.
5. Place the server on its side with the access panel facing up.
6. Remove the access panel.
7. Remove the air baffle.
8. Open the DIMM slot latches.
9. Install the DIMM.
2
10. Install the air baffle.
11. Install the access panel.
12. Install the bezel.
13. Return the server to an upright position.
14. Connect the power cord to the power source and the server.
15. Power up the server.
Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.
1
2
Installing a DIMM 67