HP AlphaServer TS15 Owner's Manual page 147

UPD>
UPD> update srm
Confirm update on:
srm
[Y/(N)] y
WARNING: updates may take several minutes to complete for each device.
srm Updating to 6.3-1...
UPD>
UPD> list
. . .
UPD> exit
Do you want to do a manual update? [y/(n)] n
Initializing....
Procedure for Updating from a CD
1. Insert "AlphaSystems Firmware Update" CD.
2. Boot the CD
The update utility runs and says that files were not found on CD, but then asks on which
device the files are located.
3. Press Return. The LFU then prompts for the name of the firmware files list. Press
Return. The default file, DS15fw.txt, will be on the CD.
4. At the UPD> prompt, enter the list command to view the firmware revisions. Then
enter the update command as appropriate to each device.
5. When done, enter the list command to see that the images successfully copied and are
listed with the correct revision.
6. When completed, type exit.
7. Answer 'n' to the question 'Do you want to do a manual update?' (unless the TIG or
RMC booter are to be updated).
kgpsa_8k_fw
kzpcc_smor
kzpcc_fw
kzpsa_fw
DO NOT ABORT!
Verifying 6.3-1...
>>>boot dqa0
DS3.81A4
1.12
CQ16
A12
PASSED.
Using Firmware 5-23