Preparing To Install Options - HP AlphaServer TS15 Owner's Manual

4.1

Preparing to Install Options

To prepare your system for installation or replacement of optional components,
assemble the required equipment, perform shutdown procedures, and attach an
antistatic wrist strap.
Who Should Install Options?
The following table list options and components that can be installed by the customer. Only
authorized service providers or customers with a self-maintenance contract should replace
all other options and components.
Options Installable by the Customer
•
Memory DIMMs
•
PCI options
•
Front access storage cage
•
Internal storage cage
•
Optional hard disks, tape drive
Before Opening the Enclosure or Installing Components:
1. Shut down the operating system, according to the instructions in the operating system
documentation.
2. Shut down peripheral devices.
3. Press the Power button on the system unit to the Off position.
4. Unplug the power cords.
5. Attach an antistatic wrist strap.
NOTE: Read through each of the following procedures before performing any steps.
4-2 hp AlphaServer TS15 Owner's Guide