Table of Contents
Advertisement
set qos map vlan-cos-map
set qos queue egress-policy
set security MAC-aging
set security filter-MAC
set security mac-learning
set security static-MAC
set snmp
set snmp community
set spantree fwddelay
set spantree hello
set spantree maxage
set spantree priority
set system contact
set system default-gateway
set system ip
set system location
set system mac
set system management-vlan
set system name
set trunk
set vlan <vid> name
set vlan <vlan id> <portlist>
set vlan type port-based
set vlan type dot1q-based
set snmp rmon
set snmp trap
set spantree disable
3.5.2.6 Show command
Show command is to display the current parameter of the switch functions. The follow table lists the show
commands and the equivalent usages.
Command
show channel
show console-info
show igmp-snooping
show ip http server
show ip telnet server
Set vlan based qos
Set the egress policy
Set MAC aging time
Create MAC filter entry
Set port leanrning MAC (enable|disable)
Create static MAC entry
Enable/Disable snmp agent
Set snmp community string
Set the forward delay for the spanning tree
Set the hello interval for the spanning tree
Set the max age interval for the spanning
Set the bridge priority for the spanning tree
Set system contact
Set default gateway
Set system ip mask
Set system location
Set system mac address
Specify a vlan for system management
Set system name
Set vlan trunk port
Set vlan name
Set vlan members
Set system be port-based vlan
Set system be dot1q-based vlan
Enable/Disable rmon state
Set snmp trap receive host
Disable spanning tree
Description
Show channel information
Show console-info
Show igmp snooping information
Show http server information
Show telnet server information
Advertisement
Table of Contents
