Show Sntp Status - Planet Networking & Communication WSGW-24020 User Manual

Broadcast Clients Poll: Enabled
Broadcast Interfaces: 1/1, 1/3

5.5.17 show sntp status

The show sntp status Privileged EXEC command shows the status of the Simple Network Time Protocol (SNTP),
Syntax
show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference
----------- -----------------
176.1.1.8 Primary
176.1.8.179 Secondary
Broadcast:
Interface IP address
------------- -----------------
176.1.1.8 Primary
Status Last response
----------- ----------------------
Up AFE252C1.6DBDDFF2
Unknown AFE21789.643287C9
Last response
------------------------
AFE252C1.6DBDDFF2
-18
User's Manual of WGSW-24020/WGSW-48040
Offset Delay
[mSec] [mSec]
----------- ------------
7.33 117.79
8.98 189.19