Port Management; Port Configuration; Port Statistics - Planet Networking & Communication WGSW-2840 User Manual

4.5 Port Management

4.5.1 Port Configuration

This function is to configure and to view the configured port management status, port negotiation mode
and the port flow control function.
Management Status: Display port status: Enable or Disable. Disable is to turn off the port.
。
Link Status: "Up" to indicate the port is linked while "Down" to indicate the port is not connectd.
。
Speed: Shows the negotiation mode and the running speed on the port.
。
Duplex: Displays full-duplex or half-duplex mode.
。
Flow Control: Display Flow status of port: Enable or Disable, Disable indicates Flow control is off.
。
Auto: Display which mode the port is auto-negotiated
。
Config: (configured) Displays the state defined by the user.
。
Atual: Displays the negotiation result.
。

4.5.2 Port Statistics

The Port Statistics page provides a view of the current status of every port on the Switch.
Pressing the "Reset" button will reset all port counters to zero.