Show Snmp Host; Show Snmp V6Host - D-Link DGS-3620-52P Manual

Layer 3 managed stackable gigabit switch
Hide thumbs Also See for DGS-3620-52P:
Table of Contents

Advertisement

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

89-18 show snmp host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp host {<ipaddr>}
Parameters
<ipaddr> - (Optional) Specify the IP address of the recipient for which the traps are targeted.
Note: If no parameter is specified, all SNMP hosts will be displayed.
Restrictions
None.
Example
To display the receipient for which the traps are targeted:
DGS-3620-28SC:admin# show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address
SNMP Version
---------------
---------------
10.48.76.100
V3 noauthnopriv
10.51.17.1
V2c
Total Entries : 2
DGS-3620-28SC:admin#

89-19 show snmp v6host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp v6host {<ipv6addr>}
Parameters
<ipv6addr> - (Optional) Specify the v6host IP address.
Community Name / SNMPv3 User Name
---------------------------------
initial
public
961

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3620-52tXstack dgs-3620 series

Table of Contents