Delete Snmp Host; Show Snmp Host - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual
Restrictions
Example usage:
To create an SNMP

delete snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:

show snmp host

Purpose
Syntax
Description
encryption of packets sent between the Switch and a remote SNMP
manager.
priv − Specifies that authorization is required, but there is no
auth_no
encryption of packets sent between the Switch
manager.
− Specifies that authorization is required, and that packets
auth_priv
sent between the Switch and a remote SNMP manger are
encrypted.
_string 24> − A string of up to 24 alphanumeric characters
<auth
used in SNMP v3 to a
the Switch's SNMP agent.
Only administr
host to receiv e SNMP messages:
DGS3100# create snmp
Success.
DGS3100#
To remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp host <ipaddr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote S
receives SNMP traps generated by the Switch's
Only administrator-level users can issue this command.
DGS3100# delete snmp host 10.48.74.100
Success.
DGS3100#
To display the recipient of SNMP traps generated by the Switch's
SNMP agent.
show snmp
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP manag
designated as recipients of SNMP traps generated by the Switch's
uthorize a remote SNMP manager to access
ator-level users can issue this command.
host 10.48.74.100 v3 auth_priv public
host {<ipaddr>}
40
and a remote SNMP
NMP manager that
SNMP agent.
ers that are