Delete Snmp Host; Show Snmp Host - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

delete snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:

show snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP hosts on the Switch:
45
Success.
DGS3100#
To remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp host <ipaddr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that
receives SNMP traps generated by the Switch's SNMP agent.
Only Administrator or operator-level users can issue this command
DGS3100# delete snmp host 10.48.74.100
Success.
DGS3100#
To display the recipient of SNMP traps generated by the Switch's
SNMP agent.
show snmp host {<ipaddr>}
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
designated as recipients of SNMP traps generated by the Switch's
SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that
receives SNMP traps generated by the Switch's SNMP agent.
None.
DGS3100# show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name / SNMPv3 User Name
--------------- --------------------- ----------------------------------
10.48.76.23 V2c
10.48.74.100 V3
private
public