Function Code; Output Of Transmission Log To The Telephone Line (Function Code 87); Counter Reset After Replacing The Fuser Unit And Paper Feeding Kit (Function Code 88); Exit From Maintenance Mode (Function Code 99) - Brother DCP-9010CN Service Manual

1.4.30 Output of transmission log to the telephone line (Function code 87)

<Function>
This function outputs the transmission log (that the machine has stored about the latest
transmission) to the telephone line. It allows the service personnel to receive the transmission
log of the user's machine at a remote location and use it for analyzing problems arising in the
user's machine.
<Operating procedure>
(1) If the user's machine has a transmission-related problem, call the user's machine at a
remote location from your machine.
(2) If the line is connected, have the user perform the following:
1) Hook up to the external phone.
2) Press the Menu, Start/Black, Menu buttons in this order.
3) Press the 8 and 7 buttons.
The above operation makes the user's machine send CNG to your machine for sending
the transmission log.
(3) If you hear the CNG sent from the user's machine, press the Start/Black button of your
machine. Your machine will start to receive the transmission log from the user's machine.
1.4.31 Counter reset after replacing the fuser unit and paper feeding kit

(Function code 88)

<Function>
The number of replacement is increased by one, and the warning indication "Replace ***" is
cleared, with implementing this operation after replacing the fuser unit and paper feed Kit.
<Operating procedure>
(1) Press the 8 button twice in the initial state of the maintenance mode.
(2) The LCD shows the "Reset Fuser Unit".
(3) Press the
"Reset-Fuser Unit"
"Reset PF-KIT T"
(4) Press the OK or Start/Black button, then "OK?" will appear on the LCD.
(5) Press the OK or Start/Black button to reset the counter of the selected part and returns
the operating procedure (2) mode.
(6) When the Stop/Exit button is pressed, the machine beeps for one second and returns to
the initial state of the maintenance mode.

1.4.32 Exit from maintenance mode (Function code 99)

<Function>
The machine returns to the ready state.
<Operating procedure>
(1) Press the 9 button twice in the initial state of the maintenance mode.
(2) The maintenance mode is finished, and the machine returns to the ready state.
or button to select the item you want to reset. The LCD shows.
7-55
Confidential