Brother DCP-9010CN Service Manual page 570

WSW41 (ON-duration of the scanning light source)
■
Selector No.
1 ON-duration of the scanning
l light source at room temperature
3 (Not used.)
4 I-FAX relay report (Not used.)
5
l Modem attenuator
8
- Selectors 5 through 8: Modem attenuator
These selectors are used to adjust the transmitting level of the modem when the reception level at
the remote station is improper due to line loss. This function applies to super G3 protocol signals.
WSW42 (Internet mail settings)
■
Selector No.
Access to the incoming mail (POP3)
1 server (Periodical or on-demand)
(Not used.)
Access to the outgoing mail (SMTP)
2
serve (Not used.)
3 I-FAX relay (Not used.)
4 JBIG encoding system
5 Drum discharge detection (Not used.)
6
l Not used.
8
Function
Function
App.1-37
Setting and Specifications
No. 5 6 7 8
0 0 0 0: -10 dBm
0 0 0 1: -11 dBm
0 0 1 0: -12 dBm
0 0 1 1: -13 dBm
0 1 0 0: -14 dBm
|
1 1 1 1: -25 dBm
Setting and Specifications
0: Not allowed
1: Allowed
Confidential