Brother DCP-9010CN Service Manual page 578

WSW55 (Interval of time requred for the developing bias voltage correction )
■
Selector No.
1 Interval of time required for the
l developing bias voltage correction
8 (hour)
The setting example of the selector number is as follows;
No.1 2 3 4 5 6 7 8
0 0 0 0 0 0 0 0 : The developing bias voltage correction is performed on each print job.
0 0 0 1 1 0 0 0 : The developing bias voltage correction is performed when a print job occurs
0 0 0 1 0 0 1 0 : The developing bias voltage correction is performed when a print job occurs
1 1 1 1 1 1 1 1 : The developing bias voltage correction is not performed.
WSW56 (Function setting 21)
■
Selector No.
PS emulation function setting
1
(Not used.)
Switching of the PPT setting
2
(Not used.)
"Last Job Reprint" function setting
3
(Not used.)
4 Wireless LAN function (Not used.)
Switching of the echo suppression
5
improvement during calling (Not used.)
Switching of the display for the
6
coverage of toner cartridge
PCL emulation function setting
7
(Not used.)
8 Switching of the CPU sleep mode
- Selector 6: Switching of the display for the coverage of toner cartridge
This selector specifies the display for the coverage of toner cartridge. Setting this selector to "0", the
machine displays the coverage only for the current toner cartridge. If this selector sets to "1", the
machine displays the coverage for all toner cartridge which had been consumed.
- Selector 8: Switching of the CPU sleep mode
This selector specifies the CPU sleep mode ON or OFF.
Function
after 24 hours or later.
after 72 hours or later.
Function
App.1-45
Setting and Specifications
0: The developing bias voltage
correction is performed on
each print job.
1-72: The developing bias voltage
correction is performed
when a print job occurs at
specified time or later.
73-254: Not allowed to set.
255 (0xFF): The developing bias voltage
correction is not performed.
Setting and Specifications
0: The coverage only for the current
toner cartridge
1: The coverage for all toner cartridges
which had been consumed
0: Invalid
1: Valid (default)
Confidential