Brother DCP-9010CN Service Manual page 121

■ Error code 60 (C), 61 (M), 62 (Y), 63 (K)
Replace Toner
Open the Top Cover, replace Toner Cartridge. Cyan (C).
Replace Toner
Open the Top Cover, replace Toner Cartridge. Magenta (M).
Replace Toner
Open the Top Cover, replace Toner Cartridge. Yellow (Y).
Replace Toner
Open the Top Cover, replace Toner Cartridge. Black (K).
Toner cartridge is at the end of life. (The counter value of the develop roller reaches the end of
life, or the toner sensor detects toner empty.)
<User Check>
- Gently shake the toner cartridge of the appropriate color from side to side and install it again.
- Replace the toner cartridge of the appropriate color.
Step
1 HVPS control PCB failure
2 Engine PCB failure
3 Main PCB failure
4 Harness connection failure of
toner/new sensor PCB ASSY
5 Toner/new sensor PCB failure
Cause
3-29
Remedy
Replace the HVPS control PCB ASSY.
Replace the engine PCB ASSY.
Replace the main PCB ASSY.
Check the sensor performance following
the procedure described in
32". If any problem occurs, check the
harness connection of the toner/new
sensor PCB ASSY of the appropriate
color, then reconnect it.
Replace the toner/new sensor PCB ASSY.
"Function code
Confidential