Continuous Print Test (Function Code 67) - Brother DCP-9010CN Service Manual

1.4.18 Continuous print test (Function code 67)

<Function>
This function allows you to conduct the pick-up and delivery test as printing patterns.
<Operating procedure>
(1) Press the 6 and 7 buttons in this order in the initial state of the maintenance mode.
(2) When "SELECT: K 100%" appears on the LCD, select a relevant continuous print pattern
using
The available continuous print patterns are shown below.
SELECT: K 100%
SELECT: C 100%
SELECT: M 100%
SELECT: Y 100%
SELECT: R 100%
SELECT: G 100%
SELECT: B 100%
SELECT: KCMY1%*
SELECT: KCMY5%*
SELECT: Lattice
* KCMY1% and KCMY5% are available only for A4 and Letter.
(3) When "SELECT: A4" appears on the LCD, select a relevant paper size using
button, and then press the OK button.
The available paper sizes are shown below.
SELECT: A4
SELECT: LETTER
SELECT: LEGAL
SELECT: A5
SELECT: B6
SELECT: A6
(4) The "PAPER FEED TEST" appears on the LCD, and print of the continuous print pattern
with the selected pick-up test items starts.
(5) When the Stop/Exit button is pressed, the machine cancels this operation, beeps for one
second and returns to the initial state of the maintenance mode.
Note:
- The machine continues the test printing until there is no paper in a tray. Press the Stop/
Exit button to stop if you check the paper feeding and ejecting operations. (Printing is
resumed when paper is loaded in the tray.)
- In the case that the error occurs during test printing, the test printing is stopped. (Printing
is resumed when the error is cleared.)
- To clear the error, remove the error factors, and then press the Start/Black button.
or button, and then press the OK button.
LCD
LCD
7-35
or
Confidential