Brother DCP-9010CN Service Manual page 102

Error message
Replace PF Kit1
Scan Unable XX
Short paper
Size Mismatch
Small paper
Toner Error
Toner Low (X)
*
Too Many Files
(USB direct interface
model only)
Unusable Device
(USB direct interface
model only)
WT Box End Soon
* (X) at the end of the message shows the color of the toner cartridge or drum unit.
(X) must be either K (Black), Y (Yellow), M (Magenta) or C (Cyan).
Description/Measure
It is time to replace the paper feeding kit. Replace the
paper feeding kit.
The machine has a mechanical problem.
Open the back cover (back-output tray) to let the printed
paper out on the back-output tray and then press Start/
Black button.
Put the same size paper in the paper tray or manual feed
slot that is selected in the machine driver, and then press
Start/Black button or select the size of paper which you
set in the paper tray size setting from the control panel
cover ASSY.
Open the back cover (back-output tray) to let the printed
paper out on the back-output tray and then press Start/
Black button.
Dismount the drum unit of the color displayed on the LCD
or all the drum units, and then take out the toner cartridge
from the drum unit(s). Put the toner cartridge back to the
drum unit(s), and remount the drum unit(s) to the printer.
The toner cartridge is nearly empty. Buy a new toner
cartridge that is indicated on the LCD before you get a
"Replace Toner" message.
There are too many files stored on the USB flash
memory drive.
Remove the USB flash memory drive from the USB
Direct Interface.
The waste toner box will need replacement soon. Buy a
new waste toner box before you get a "Replace WT Box"
message.
3-10
Refer to:
3-24
3-43
I
3-45
3-27
3-35
3-39
3-27
3-47
3-30
---
3-48
3-56
3-28
3-53
Confidential