Brother DCP-9010CN Service Manual page 286

(3) Open the ADF unit and lift it slightly, insert the Ferrite core of the ADF harness unit into
the hole of the Document scanner unit, and remove the ADF unit.
Hole
ADF harness unit
Ferrite core
Harness routing: Refer to
(4) Turn the ADF unit upside down.
(5) Remove the two Taptite cup B M3x10 screws and one Taptite cup S M3x12 screw, and
then remove the Hinge ASSY L from the ADF unit.
3b
Fig. 5-41
" ADF Unit."
Taptite cup B M3x10
ADF unit
Fig. 5-42
5-59
ADF unit
3a
Document scanner unit
Taptite cup S M3x12
Hinge ASSY L
Taptite cup B M3x10
Confidential