Brother DCP-9010CN Service Manual page 574

WSW47 (Switching between high- and full-speed USB)
■
Selector No.
Handling paper at the occurrence of
1
a paper feed timing error (Not used.)
Reducing to A4 from B4 and sending
2
at the real time sending (Not used.)
3 Delay of FAX line disconnection
when switching to the pseudoringing
4 external telephone (Not used.)
Disable the ringer of external
5 telephone at non-ring reception
(Not used.)
6 Not used.
Disable the ringer of external
telephone with CAR signal when
7
caller ID service is available
(Not used.)
Switching between high-speed USB
8
and full-speed USB
Note:
- Selector 1 is applicable only to models equipped with flat-bed scanners.
- Selectors 3 and 4 are applicable only to models supporting pseudo-ringing of a connected
external telephone.
WSW48 (USB setup latency)
■
Selector No.
1
Not used.
2
3
Number of network TWAIN PCs
l
registered for each application
5
6
l USB setup latency (Not used.)
8
Function
Function
App.1-41
Setting and Specifications
0: Auto switching between high-speed
USB (ver. 2.0) and full-speed USB
(ver. 1.1)
1: Fixed to full-speed USB (ver. 1.1)
Setting and Specifications
No. 3 4 5
0 0 0: 25 PCs
0 0 1: 50 PCs
0 1 0: 75 PCs
0 1 1: 100 PCs
1 0 0: 125 PCs
1 0 1: 150 PCs
1 1 0: 175 PCs
1 1 1: 200 PCs
Confidential