Installing Procedure - Brother DCP-9010CN Service Manual

<Installing procedure>
(1) Assemble the Fuser unit while holding the "A", and then secure it with the two Taptite pan
B M4x14 screws.
Fuser unit
Note:
The Fuser unit for replacement is transported while the pressure roller is held lightly to
prevent deformation of the pressure roller. When assembling the Fuser unit, make
sure to assemble the Fuser unit to the product first, and then remove the Spacer in the
direction of the arrow from the Fuser unit.
Fuser unit
Taptite pan B M4x14
Fig. 4-13
Spacer
Fig. 4-14
4-11
Main body
Taptite pan B M4x14
"A"
Pressure roller ASSY
<Back side>
Spacer
Confidential