Brother DCP-9010CN Service Manual page 566

WSW37 (Function setting 15)
■
Selector No.
Printout of the stored image data of
1 an unsent document onto an error
report
Erasure of the stored image data of
an unsent document at the time of
2
the subsequent inmemory message
transmission
3
l Not used.
8
- Selector 1: Printout of the stored image data of an unsent document onto an error report
This selector determines whether or not to print out the 1st-page image data of a document onto the
error report if the document image data stored in the temporary memory cannot be transmitted normally.
- Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the temporary
memory will be occupied with image data. Setting selector 2 to "1" will automatically erase the
stored 1st-page image data of an unsent document at the time of the subsequent in-memory
message transmission only when recording paper or toner runs out.
Function
App.1-33
Setting and Specifications
0: No
1: Yes
0: No
1: Yes
Confidential