Brother DCP-9010CN Service Manual page 579

WSW57 (Function setting 22)
■
Selector No.
1
Caller ID judgment voltage (to be
l
distinguished from rings) (Not used.)
3
4 Caller ID judgment voltage (to be
l distinguished from reverse polarity
6 voltages) (Not used.)
7 Caller ID burst link time limit
Base unit Start button after cordless
8
handset dialing (Not used.)
WSW58 (Function setting 23)
■
Selector No.
Prevention of line interrupt during
1
ICM recording (ratio of guard tone
l
response time to call end tone ON
3
time) (Not used.)
4
Not used.
5
Extension of the "No. of CNG cycles
to be detected" (which allows two
cycles to be added to the cycles
6
specified by selectors 6 and 7 on
WSW26 and selectors 4 and 5 on
WSW34) (Not used.)
7
No. of busy tone detection cycles
(Not used.)
8
Function
Function
App.1-46
Setting and Specifications
0: Enable
1: Disable
Setting and Specifications
Confidential