Brother DCP-9010CN Service Manual page 209

(5) Release the Fuser cover lock lever L and R, and open the Fuser cover.
Fuser cover lock lever R
5a
(6) Take out the Shaft at the left side of the Fuser cover from the Notch on the Bush of the
Side frame L.
(7) Take out the Shaft at the right side of the Fuser cover from the Bush of the LVPS cover,
and remove the Fuser cover.
LVPS cover
Bush
5b
Fuser cover lock lever R
Fig. 4-5
7a
7b
Shaft at the right side
Fig. 4-6
4-7
Fuser cover lock lever L
5a
Fuser cover lock lever L
Fuser cover
<Back side>
Side frame L
Notch on the bush
Shaft at the left side
Fuser cover
<Back side>
Confidential