Display Machine Error Code (Function Code: 82); Send Communication Log Information To Telephone Line (Function Code: 87); Quit Maintenance Mode (Function Code: 99); Display Machine Error Code - Brother DCP-1510 Service Manual

1.3.23 Display machine error code (function code: 82)

<Function>
This function is used to display the latest machine error code on the LCD.
<Operating Procedure>
(1) Ten-key pad models
Press the [8] and [2] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) "MACHINE ERR XXXX" is displayed on the LCD.
When the [Stop/Exit] button is pressed, the machine returns to the initial state of
maintenance mode.

1.3.24 Send communication log information to telephone line (function code: 87)

<Function>
This function is used to send the error list to service personnel at a remote service station
when a fax communication problem has occurred in the user's machine. Receiving the error
list allows the service personnel to analyze the problem in the user's machine.
<Operating Procedure>
• Service side
(1) The service personnel connects the telephone line to the target user.
• User side
(2) While the machine is in the ready state, press the [Menu], [Start] and [Menu] buttons in
this order. "0" is displayed on the LCD.
(3) Press the [8] and [7] buttons in this order. "SENDING P.01" is displayed on the LCD,
and the error list is sent.
(4) When sending the error list is completed, the machine returns to the ready state.

1.3.25 Quit maintenance mode (function code: 99)

<Function>
This function is used to quit maintenance mode.
<Operating Procedure>
(1) Ten-key pad models
Press the [9] button twice in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) The machine quits maintenance mode and returns to the ready state.
] or [ ] button to display "MAINTENANCE 82" on the LCD and press the
] or [ ] button to display "MAINTENANCE 99" on the LCD and press the
4-36
Confidential