Wrinkles On Paper; Curl Of Paper - Brother DCP-9010CN Service Manual

3.5

Wrinkles on Paper

<User Check>
- Check if the paper is loaded into the paper tray correctly.
- Turn over the stack of paper in the paper tray, or try rotating the paper 180 ° in the paper tray.
- Check if the thickness of the paper is 60 to 105 g/m
Step
1 Fuser unit failure
3.6

Curl of Paper

Note:
Be sure not set the curl improvement mode of the driver and switch to the delivery roller
switch lever at the same time because it might worsen the level of curl.
Delivery roller switch lever
Cause
Do wrinkles on the
paper disappear after
replacing the fuser unit
with a new one?
<User Check>
- Change the curl improvement mode setting of the driver.
- Switch the delivery roller switch lever.
Delivery roller switch lever
Fig. 3-8
2
.
Check
Result
Yes
<Left side>
3-60
Remedy
Replace the fuser unit.
Confidential