High-Voltage Power Supply Pcb Assy - Brother DCP-9010CN Service Manual

8.84 High-voltage Power Supply PCB ASSY

(1) Remove the two Taptite bind B M4x12 screws and two Taptite pan (washer) B M4x12DA
screws from the High-voltage power supply PCB ASSY.
Taptite bind B M4x12
(2) Remove the Taptite cup S M3x6 SR screw, and then remove the HVPS ground plate 2
from the High-voltage power supply PCB ASSY.
Taptite cup S M3x6 SR
High-voltage power supply PCB ASSY
Taptite pan (washer) B M4x12DA
Fig. 5-246
Fig. 5-247
5-189
Taptite bind B M4x12
High-voltage power
supply PCB ASSY
HVPS ground plate 2
Confidential