Brother DCP-9010CN Service Manual page 563

WSW31 (Function setting 9)
■
Selector No.
1 Not used.
Default reduction rate for failure of
2
automatic reduction during recording
3 Not used.
4 Do not disturb this selector.
Minimum ON and OFF duration of
5 ringer signals effective in distinctive
ringing (Not used.)
6
l Not used.
7
8 Drum life indication
Note:
Selector 5 is applicable only to the USA models.
- Selector 2: Default reduction rate for failure of automatic reduction during recording
This selector sets the default reduction rate to be applied if the automatic reduction function fails to
record one-page data sent from the calling station in a single page of the current recording paper.
If it is set to "0," (ON) the machine records one-page data at full size (100%) without reduction; if it is
set to "1," (OFF) the machine records it at 70% size.
WSW32 (Function setting 10)
■
Selector No.
1
l Not used.
4
5
Default resolution when FAX scanning
6
7
Default contrast when FAX scanning
8
- Selectors 5 and 6: Default resolution
These selectors set the default resolution which applies when the machine is turned on or
completes a transaction.
- Selectors 7 and 8: Default contrast
These selectors set the default contrast which applies when the machine is turned on or completes
a transaction.
Function
Function
App.1-30
Setting and Specifications
0: ON
1: OFF
0: No
1: Yes
Setting and Specifications
No. 5 6
0 0: Standard
0 1: Fine
1 0: Super fine
1 1: Photo
No. 7 8
0 0: Automatic
0 1: Automatic
1 0: Super light
1 1: Super dark
Confidential