System Menu - Roland V-1600HD Owner's Manual

SYSTEM Menu

fig.system-menu2.eps
Bus Structure
Frame Rate
Sync Reference
Sync Clock Adjust
Sync Line Adjust
NTSC Setup Level
Tally Signal Assign
MIDI
* Paremeters for MIDI settings are described in the reference document for remote control. Download the document from the following Roland website.
http://www.rolandsystemsgroup.net/
Remote
Output Fade
Memory Store Parameters
Memory Protect
USB Memory
Parameter Storage
Still Image
Format
LCD
Brightness
Contrast
Back Light
LED Dimmer
Video Fader Calibrate
Test Pattern
Factory Reset
* Refer to the next page for items to save or not save when [System] in [Memory Store Parameters] is turned to ON.
This changes the mode and alters the internal signal flow.
This changes the frame rate of video input and output.
This changes the source of the synchronizing signal.
This adjusts the timing of the synchronizing signal.
This adjusts the position of the synchronizing signal.
This changes the black setup level for NTSC.
This makes settings for tally output.
Destination
This selects the connector number and pin number.
Signal
This selects the channel to assign to the connector and pin chosen using [Destination].
This makes settings for MIDI.
This makes settings for remote control.
Active Connector
This selects the connector for remote control.
This makes settings for the OUTPUT FADE button.
Time
This sets the length of the fade time.
Red
This sets the R value of the fade color (RGB).
Green
This sets the G value of the fade color (RGB).
Blue
This sets the B value of the fade color (RGB).
This selects the item to save to a MEMORY button.
PinP
This saves the PinP settings.
Key
This saves the key-compositing settings.
Transition
This saves the transition-effect settings.
DSK
This saves the On/Off and DSK settings.
Input
This saves the input settings.
Output
This saves the output settings.
System *
This saves the system settings.
Cross Point
This saves the channel-selection state plus On/Off state of Key and PinP .
Still Image
This saves the file name of an imported still image.
This prohibits saving that overwrites existing settings in MEMORY.
This saves settings to a USB memory device and imports saved settings.
Load
This imports saved settings.
Save
This saves the current settings by overwriting.
Save As
This newly saves the current settings.
Delete
This deletes a settings file from the USB memory device.
This makes settings for still images and imports still-image files.
Size
This sets the size of the still image.
Memory Area 1
This imports a still image to Memory Area 1.
Memory Area 2
This imports a still image to Memory Area 2.
Memory Area 3
This imports a still image to Memory Area 3.
Memory Area 4
This imports a still image to Memory Area 4.
This formats a connected USB memory device.
This adjusts the brightness of the monitor screen.
This adjusts the contrast of the monitor screen.
This adjusts the backlight of the monitor screen.
This adjusts the brightness of buttons and indicators.
This performs calibration of the video fader.
This outputs a test pattern.
This restores the V-1600HD to its factory-default state.
* Set this to [Internal] when Frame Rate setting is [50Hz] and output format is RGB.
* Turns off when start up this unit regardless to previous setup.
Menu Operations and Menu List
51