Operating The Menu - Roland SR-20HD Startup Manual

Operating the Menu

Here's how to access the menu to configure the video/audio/livestreaming settings and the settings for the SR-20HD.
* The menu can also be shown on the display that is connected to the HDMI OUT PVW connector.
1.
Press the [MENU] button to display the menu.
The [MENU] button lights up, the menu categories are displayed.
2.
Turn the [VALUE/CURSOR] knob to select a category, and press the [VALUE/CURSOR] knob to confirm.
The menu for the selected category is displayed.
3.
Turn the [VALUE/CURSOR] knob to select a menu item, then press the [VALUE/CURSOR] knob to confirm.
The cursor moves to the setting value.
¹ If the menu item is located at a deeper level, repeat step 3.
¹ Pressing the [EXIT] button moves you back one level higher.
4.
Turn the [VALUE/CURSOR] knob to change the value of the setting.
¹ By turning the [VALUE/CURSOR] knob while pressing it, you can change the value more greatly.
¹ Pressing and holding the [VALUE/CURSOR] knob returns the current menu item you're setting to its default value.
5.
Press the [VALUE/CURSOR] knob to apply the setting.
The cursor returns to the menu item.
6.
Press the [MENU] button to quit the menu.
Basic Operations
7