Compositing Using Luminance Key/Chroma Key - Roland V-1600HD Owner's Manual

Compositing the Pictures

Compositing Using Luminance Key/Chroma Key

1.
Display the background picture.
Before performing the operation, set the display mode for the unit's monitor to [PGM]. At the PGM section, use the INPUT
selectors to select the background picture and display it on the unit's monitor.
2.
Select the channel of the picture to superimpose.
Set the display mode for the unit's monitor to [PVW]. At the PST/EFFECT section, use the INPUT selectors to choose the channel
you want to superimpose.
3.
Turn on the key.
At the KEY section, press the [ON] button. It lights up in green.
fig.Key-on.eps
4.
Adjust the amount of keying and the degree of edge blur.
While watching the preview on the unit's monitor, go to the KEY section and use the [LEVEL] dial to adjust the amount of keying
and the [GAIN] dial to adjust the degree of blur for the edges.
fig.adjust-level-gain.eps
5.
Output the composited results.
Press the [TAKE] button. The [ON] button lights up in red and the results of compositing are output from the V-1600HD.
When Key is activated, MIX is automatically selected even if you have selected WIPE in the WIPE PATTERN section.
34