Roland V-1600HD Owner's Manual page 50

Menu Operations and Menu List
OUTPUT Menu
fig.output-menu.eps
PGM Format
AUX Source
Source Assign
* Applicable to DVI-D/HDMI output and RGB/Component output when DVI-D/HDMI Color Space is set to
[YCC 422], [RGB 0-255] or [RGB 6-235].
50
This selects the format of final output.
Format
This selects the format of final output.
DVI Connector Signal This selects the signal type of DVI-D/HDMI OUT jack.
DVI-D/HDMI Color Space This selects the mode of the color space.
Scaling H
This performs horizontal expansion or reduction.
Scaling V
This performs vertical expansion or reduction.
Zoom
This adjusts the enlargement factor of the picture.
Position H
This adjusts the horizontal position of the picture.
Position V
This adjusts the vertical position of the picture.
Brightness
This adjusts the brightness.
Contrast
This adjusts the contrast.
Saturation
This adjusts the saturation.
Red *
This adjusts the R value of RGB.
Green *
This adjusts the G value of RGB.
Blue *
This adjusts the B value of RGB.
Edge Blending Gamma This selects the type of signal decrement according connected output devices.
Edge Blending Width
This adjusts the blur width during edge blending.
Top
This adjusts the blur width of the upper edge.
Bottom
This adjusts the blur width of the bottom edge.
Right
This adjusts the blur width of the right edge.
Left
This adjusts the blur width of the left edge.
This changes the AUX output point.
This assigns output points to the respective connectors.
SDI 1
* Only PGM can be assigned to SDI OUT (1:PGM).
SDI 2
This selects the output source assigned to SDI OUT (2).
DVI-D/HDMI 1
* Only PGM can be assigned to DVI-D/HDMI OUT (1:PGM).
DVI-D/HDMI 2
This selects the output source assigned to DVI-D/HDMI OUT (2).
RGB/COMPONENT
This selects the output source assigned to RGB/COMPONENT OUT.
SD
This selects the output source assigned to SD OUT.