Selecting the Channel Displayed on the Monitor
You can display any of the following three channels on the V-1600HD's monitor.
• PGM
The final output of the V-1600HD (program output) is displayed.
• PVW
A preview of the standby video is displayed. This lets you execute a transition after first checking the video currently on standby.
• AUX
This displays the video starting at various output points in the V-1600HD. For information on changing the output point, refer to "Switching
the AUX Output Point" (p. 43).
* By default, the unit is set to display final output (PGM).
Switching the display channel is accomplished using the [MONITOR] buttons. The selected button lights up.
fig.monitor-button.eps
Dropping or repeating of frames may occur briefly on the unit's monitor display, but this does not indicate a malfunction.
27