Enlarging/Reducing The Picture - Roland V-1600HD Owner's Manual

Enlarging/Reducing the Picture

Using the joystick and dial in the PinP section, you can output an enlarged or reduced view of the picture.
When using this feature, turn off Picture-in-Picture. Go to the PinP section and make sure the [ON] button is dark.
1.
Output the video.
Select the picture you want to display at enlarged or reduced size on PST/EFFECT button.
2.
Turn on the enlarge/reduce feature.
At the PinP section, make sure the [ON] button is dark, then press the [CONTROL] button. The [VIEW] indicator lights up.
* When the [ON] button is dark, operating the [CONTROL] button does not make the [PinP] indicator light up. Only the [VIEW] indicator lights up
or goes dark.
fig.view-on.eps
3.
Enlarge or reduce the picture.
Turn the [SIZE] dial to re-size the video source.
* Turning the control all the way counterclockwise displays the picture at 10% reduced size. You can enlarge the display by up to 1,000% by
turning clockwise.
fig.zoom-in-out.eps
4.
Change the portion that is displayed.
Use the [POSITION] joystick to re-position.
fig.joy-stick.eps
38