Applying Fade To Final Output - Roland V-1600HD Owner's Manual

Applying Fade to Final Output

You can use the [OUTPUT FADE] button to apply a fade to the final output of the V-1600HD.
Pressing the [OUTPUT FADE] button makes the button flash and starts a fade-out. When the fade-out has been completed, the
button stops flashing and stays lit.
Pressing the button a second time makes it flash and starts a fade-in. When the fade-in has been completed, the button goes
dark.
fig.output-fade.eps
* The fade-in/fade-out time is set to 1 second by default. You can use the menus to change the time. Refer to "Menu Operations and Menu List"
(p. 47).
* The fade color is set to black (R: 16, G: 16, B: 16) by default. You can specify a different color by changing the RGB parameters. Refer to "Menu
Operations and Menu List" (p. 47).
39