Switching The Picture Using The Video Fader - Roland V-1600HD Owner's Manual

Switching the Video in the DSK Mode (PGM/PST)

Switching the Picture Using the Video Fader

Using the [TAKE] button makes the transitions occur linearly. To stop partway through and show a mix of two channels, perform
the mix transition manually using the video fader.
1.
Move the video fader all the way.
Before you carry out the transition operation, move the video fader all the way toward either the front or the back.
2.
Select the transition effect.
Use the buttons in the WIPE PATTERN section to choose a transition effect.
When you have selected [CUT] in the WIPE PATTERN section, the transition takes place instantly at the video fader's center position. If you want to
show a double exposure, choose a transition other than [CUT].
3.
Select the channel you want to output next (standby).
Use the [PST/EFFECT] buttons to choose the channel you want to display next.
4.
Switch the output video.
Move the video fader in the opposite direction of step 1. You can show a double exposure by stopping partway.
fig.move-fader.eps
30