Roland V-1600HD Owner's Manual page 49

TRANSITION Menu
fig.transition-menu.eps
Time
Unit
Wipe Pattern
Wipe 1 - 4
Pattern
Direction
Border
INPUT Menu
* When the INPUT button is illuminated, going to the PST/EFFECT section and pressing an INPUT selector lets you directly access a setting screen
for the corresponding channel.
fig.input-menu.eps
Ch.1 - 8
Ch.9 - 12
Ch.13
Ch.14
This sets the length of the transition-effect time.
This selects the unit used for the time setting (seconds, seconds + frames or frames).
This selects the WIPE PATTERN button.
This makes various settings for the wipe. You can make the settings independently for buttons [1] through [4].
This selects the pattern.
This selects the direction of the wipe.
This makes settings for the wipe border.
Width
This adjusts the width of the border.
Red
This sets the R value of the border color (RGB).
Green
This sets the G value of the border color (RGB).
Blue
This sets the B value of the border color (RGB).
This makes settings for input on channels 1 through 8 (SDI).
Selectable / Locked
When this is set to [Selectable], you can select the channel. When this is set to [Locked], you cannot select the channel.
Format
This limits the input format. When this is set to [Auto], all inputtable formats are supported.
Deinterlacing
To keep input unchanged, select [Normal]. To apply motion correction, select [Motion Adaptive].
Scaling Type
This selects the processing applied when a signal is input whose aspect ratio differs from the output format.
Manual Scaling H
This performs horizontal expansion or reduction manually. It is enabled only when [Manual] has been selected using [Scaling Type].
Manual Scaling V
This performs vertical expansion or reduction manually. It is enabled only when [Manual] has been selected using [Scaling Type].
Zoom
This adjusts the enlargement factor of the picture.
Position H
This adjusts the horizontal position of the picture.
Position V
This adjusts the vertical position of the picture.
Brightness
This adjusts the brightness.
Contrast
This adjusts the contrast.
Saturation
This adjusts the saturation.
This makes setting for the input on channels 9 through 12 (RGB, component, DVI-D, and HDMI).
Setting items other than those described below are the same as for channels 1 through 8.
Color Space
This selects the mode of the color space.
Flicker Filter
This switches flicker prevention on or off.
Auto Sampling
This executes sampling automatically.
Sampling Position H
This adjusts the horizontal sampling-start location.
Sampling Position V
This adjusts the vertical sampling-start location.
Sampling Frequency
This adjusts the sampling frequency.
Sampling Phase
This adjusts the sampling phase.
This makes settings for input on channel 13 (analog SD).
The setting items are the same as for channels 1 through 8, except that sampling-related items are not available.
This makes settings for channel 14 (background and still image).
Setting items other than those described below are the same as for channel 13. During background output, only the settings for R/G/B are enabled.
Memory Area
This specifies the still-image import area.
Menu Operations and Menu List
49