Roland V-1600HD Owner's Manual page 55

4.
Edit the file name.
Use the left and right [CURSOR] buttons to change the location of character selection, then use the [VALUE] dial to change to a
different character.
* You can use the up and down [CURSOR] buttons to insert or delete characters.
fig.name-file.eps
5.
Save to the USB memory device.
Deciding on a file name and pressing the [ENTER] button displays the message "Push enter to execute." If you want to save, press
the [ENTER] button.
* The settings file is saved in the root directory of the USB memory device.
6.
Exit the menu.
Press the [EXIT] button to exit the menu.
At the [Parameter Storage] menu under [USB Memory], you can also carry out the operations described below.
• [Load] This imports settings saved on the USB memory device into the V-1600HD.
• [Save] This saves settings by overwriting.
• [Delete] This deletes a settings file (.V16) from the USB memory device.
* When you complete loading the settings from a connected USB memory with [Load] menu, press the corresponding MEMORY button to
refresh the V-1600HD's settings.
Saving Settings to a USB Memory Device
55