Roland V-1600HD Owner's Manual page 41

5.
Select the size.
Turn the [VALUE] dial to choose the display size. Press the [ENTER] button to confirm.
* Changing the size may take a while.
The V-1600HD cannot display still images at reduced size. The size of still image should match the output format of V-1600HD. Mismatched BMP
file dimensions and output format may result in incorrect display of your still image.
fig.select-size.eps
6.
Specify the import area in internal memory.
Use the up and down [CURSOR] buttons to specify an area in internal memory (Memory Area 1 to 4). Move the on-screen cursor to
[Enter], then use the [ENTER] button. The display changes to a screen for specifying the file.
fig.load-area.eps
7.
Import the still-image data.
Use the up and down [CURSOR] buttons to choose the file (.bmp), then press the [ENTER] button. Press the [ENTER] button to
confirm. The still-image file is loaded into the area you specified in step 6. Press the [EXIT] button to exit the menu temporarily.
fig.load-file.eps
8.
Access the menu for input on channel 14.
Go to the SETUP section and press the [INPUT] button to access the INPUT menu.
fig.input-button.eps
Outputting a Still Image
41