Basic Operations; Turning The Power On/Off; Operating The Menu - Roland V-02HD Reference Manual

Basic Operations

Turning the Power On/Off

* Before turning the unit on/off, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/off. However, this is normal
and does not indicate a malfunction.
Turning the power on
1
Make sure that all devices are powered-off.
2
Turn on the V-02HD's [POWER] switch.
3
Turn on the power in the order of source devices 0
output devices.
Turning the power off
1
Turn off the power in the order of output devices 0
source devices.
2
Turn off the V-02HD's [POWER] switch.
About the Auto Off function
The power to the V-02HD turns off automatically when all of the
following states persist for 240 minutes (Auto Off function).
5 No operation performed on the V-02HD
5 No audio or video input
5 No equipment is connected to the PROGRAM OUT/PREVIEW
OUT connectors
If you do not want the power to be turned off automatically,
disengage the Auto Off function. Press the [MENU]
button 0 "SYSTEM" 0 set "AUTO OFF" to "OFF. "
* Unsaved data is lost when the power turns off. Before turning
the power off, save the data that you want to keep.
* To restore power, turn the power on again.

Operating the Menu

Here's how to access the menu, and make video/audio settings and
settings for the V-02HD itself. The menu is shown on the display that's
connected to the PREVIEW OUT connector.
1
Press the [MENU] button to display the MENU screen.
The menu is organized into functions.
2
Turn the [VALUE] knob to move the cursor to the menu
item that you want to change, and then press the
[VALUE] knob.
3
Repeat step 2 as needed.
Pressing the [MENU] button moves you back one level higher.
4
Turn the [VALUE] knob to change the setting value, and
then press the [VALUE] knob to confirm.
MEMO
5 By turning the [VALUE] knob while pressing it, you can
change the value more greatly.
5 Long-pressing the [VALUE] knob returns the current menu
item you're setting to its default value.
5
Press the [MENU] button several times to close the menu.
7