Turning The Power On And Off; Turning The Power On; Turning The Power Off - Roland V-1600HD Owner's Manual

Turning the Power On and Off

Turning the Power On

Once the connections have been completed (p. 9), turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to monitors or other devices.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
1.
Connect the peripheral devices.
Connect video cameras or other equipment. Make the connections while the power to all equipment, including the V-1600HD, is
turned off.
2.
Turn on the power to the V-1600HD.
Set the POWER switch on the rear panel to ON to turn on the power to the V-1600HD.
fig.power-on.eps
3.
Turn on the power to the peripheral devices.
Turn on the power to the peripheral devices connected to the V-1600HD.

Turning the Power Off

1.
Turn off the power to the peripheral devices.
Turn off the power to the devices connected to the V-1600HD.
2.
Turn off the power to the V-1600HD.
Set the POWER switch on the rear panel to OFF to turn off the power to the V-1600HD.
11