Roland V-1600HD Owner's Manual page 29

3.
Select the transition effect.
Use the buttons in the WIPE PATTERN section to choose a transition effect.
fig.wipe-pattern.eps
• WIPE 1 through 4
A wipe transition is made according to the wipe pattern shown by the icon above the button.
• FAM (Full-Additive Mix)
A mix transition is made with the luminance levels of the two pictures remaining unchanged.
• NAM (Non-Additive Mix)
During the transition, the picture is displayed progressively, starting with the areas of highest luminance level.
• MIX
The transition is made progressively as the two pictures are mixed.
• CUT
The transition is made instantly, with no transition effect applied.
* You can use the menus to change the setting for the transition effect. Refer to "Menu Operations and Menu List" (p. 47).
When PinP or Key is activated, MIX is automatically selected even if you have selected WIPE in the WIPE PATTERN section.
4.
Select the channel you want to output next (standby).
Use the [PST/EFFECT] buttons to choose the channel you want to display next. Pressing the button makes it light up green.
* When the display mode for the monitor is set at [PVW], the video on the selected channel is displayed on the V-1600HD's monitor.
fig.select-PST.eps
5.
Switch the output video.
Preview the standby video, and press the [TAKE] button when you want to make the transition. The picture changes and the PGM
button lights up red.
* When the display mode for the monitor is [PVW], the monitor display does not change. Selecting another channel to display next on standby
makes the monitor display the newly selected standby channel.
fig.TAKE-button.eps
Switching the Video in the DSK Mode (PGM/PST)
29