Menu-Screen Parameter List; Audio - Roland VR-50HD Reference Manual

Multi-format av mixer
Hide thumbs Also See for VR-50HD:
Table of Contents

Advertisement

Menu-Screen.Parameter.List
Pressing.the.[MENU].button.displays.the.menu.screen ..Choose.the.
item.whose.setting.you.want.to.change .

Audio

1–4
Parameter
Value
+48 V
OFF,.ON
Solo
OFF,.ON
Mute
OFF,.ON
Gain
0.0–+72.dB
HPF
OFF,.ON
Level
-INF–0 .0–+6 .0.dB
Delay
0.0–500 .0.ms
AUX Send
-INF–0 .0–+6 .0.dB
AUX Delay
0.0–500 .0.ms
Reverb Send
0–127
Left,.L62–L01,.Center,.R01–R62,.
Pan
Right
Equalizer
OFF,.ON
ON/OFF
High
-15–0–+15.dB
Frequency
700.Hz–8 kHz–11.kHz
Mid
-15–0–+15.dB
Frequency
20.Hz–2.5 kHz–10.kHz
Q
0 .5–1.0–16 .0
Low
-15–0–+15.dB
Frequency
55.Hz–110 Hz–800.Hz
Gate
ON/OFF
OFF,.ON
Threshold
-50–-48–0.dB
Release
30–500–5000.ms
Compressor
ON/OFF
OFF,.ON
Threshold
-50–-16–0.dB
Ratio
1 .0:.1–INF: 1
Attack
0 .2–50–100.ms
Release
30–500–5000.ms
MEMO
•. The.values.in.bold.are.the.factory.default.values.of.the.VR-50HD ..
•. You.can.change.a.setting.value.rapidly.by.holding.down.the.
•. If.the.MEMORY.screen's. " Auto.Store".setting.(p ..11).is.set.to.ON,.the.
Explanation
You.set.this.to.ON.when.using.a.microphone.that.requires.phantom.power .
When.listening.to.audio.through.headphones,.you.can.hear.just.the.channels.for.which.this.value.is.set.to.ON .
This.mutes.the.audio.on.the.selected.channel .
This.adjusts.the.input.gain ..You.can.also.use.the.[GAIN].knobs.on.the.top.panel.to.adjust.this .
This.switches.the.high-pass.filter.(75.Hz).on.and.off .
This.adjusts.the.level.sent.to.the.MAIN.bus ..You.can.also.use.the.channel.faders.on.the.top.panel.to.adjust.this .
This.adjusts.the.amount.of.delay.for.correcting.audio.that.is.out.of.sync.with.the.video.(lip-sync) .
This.adjusts.the.level.sent.to.the.AUX.bus .
This.adjusts.the.amount.of.delay.for.correcting.audio.and.video.sent.to.the.AUX.bus.that.are.out.of.sync.
(lip-sync) .
This.sets.the.amount.of.reverb.applied .
This.adjusts.the.left-right.balance.of.input .
This.switches.the.equalizer.on.and.off .
This.sets.the.gain.of.the.high-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.High .
This.sets.the.gain.of.the.middle-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.Mid .
This.sets.the.width.of.the.area.affected.by.the.equalizer.centered.at.the.Mid-Frequency ..
Higher.values.will.narrow.the.area .
This.sets.the.gain.of.the.low-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.Low .
This.switches.the.gate.feature.on.and.off .
This.sets.the.sensitivity.at.which.the.gate.starts.to.be.applied .
This.adjusts.the.time.from.when.the.gate.begins.to.function.until.the.noise.level.reaches."0 . "
This.switches.the.compressor.on.and.off .
This.sets.the.sensitivity.at.which.the.compressor.starts.to.be.applied .
This.sets.the.compression.ratio.at.which.the.audio.signal.will.be.compressed .
This.sets.the.time.from.when.the.input.level.exceeds.the.threshold.level.until.the.compressor.begins.
operating .
This.sets.the.time.from.when.the.input.level.falls.below.the.threshold.level.until.the.compressor.stops.
operating .
Hold.down.[ENTER].button.and.press.[EXIT].button.to.make.the.
value.return.to.default ..Continuing.to.hold.down.these.buttons.
returns.related.parameters.displayed.on.the.same.screen.to.
their.factory.default.values .
[ENTER].button.and.turning.the.[VALUE].knob .
state.in.effect.when.you.exit.the.menu.screen.is.automatically.
saved.on.the.Memory.No ..1 .
3

Advertisement

Table of Contents
loading

Table of Contents