Menu Operations - Roland VR-50HD Owner's Manual

Menu Operations

You use the [MENU] button and the [VALUE] knob, or the touch panel, to make various settings.
MEMO
For detailed information on menu items, refer to the "Reference Manual" (PDF) for the VR-50HD, which can be downloaded from the following
Roland website.
http://www.rolandsystemsgroup.net/
1.
Display the menu screen .
Pressing the [MENU] button displays the menu screen.
2.
Touch the screen to select the item whose setting you
want to make .
The parameter setting screen appears.
• When the parameters cannot be displayed on a single screen,
and appear at the bottom of the screen.
You can switch screens by touching
3.
Touch the screen to select a parameter to set .
The selected parameter is displayed in red.
or .
4.
Turn the [VALUE] knob to change the setting value .
• When the setting is an on/off value, every touch of the
parameter switches the value on or off.
Values that have been switched on are displayed in green.
• When the setting value is displayed by a button icon, touching
the button selects the value.
• You can change a setting value rapidly by holding down the
[ENTER] button and turning the [VALUE] knob.
• Holding down the [ENTER] button and pressing the [EXIT]
button returns the currently selected parameter to its initial
value. Continuing to hold down these buttons returns related
parameters displayed on the same screen to their initial values.
5.
Press the [EXIT] button to return the original screen .
• Pressing the [MENU] button quits the menu screen.
If the MEMORY screen's "Auto Store" setting (p. 39) is set to ON, the
state in effect when you exit the menu screen is automatically
saved on Memory No. 1.
13