Zooming a Portion of the Inset Screen
You can display an enlarged view of a portion of the inset screen using the zoom feature.
You can use this feature only when the [ON] button in the PinP section is illuminated.
At the PinP section, press the [CONTROL] button to make the [VIEW] indicator light up.
fig.select-view-mode.eps
The procedure for displaying the inset screen is the same as for resize mode.
The functions of the dial and joystick change as described below.
• [SIZE] Dial
Turning this changes the amount of zooming in or out. Turning it all the way counterclockwise displays the picture at 100% (no enlargement).
You can enlarge the display by up to 1,000% by turning clockwise.
• [POSITION] Joystick
This lets you re-position the displayed portion within the inset screen.
When you want to re-locate or re-position the inset screen itself, use the PinP mode; the View mode will not re-position or re-size the inset
window itself.
Compositing the Pictures
33