Selecting The Output Format - Roland V-1600HD Owner's Manual

Selecting the Output Format

Select the output format to match the source and output equipment connected to the V-1600HD. Making a selection makes one
of the [OUTPUT FORMAT] indicators light up.
fig.format-indicator.eps
On the V-1600HD, you can select the following output formats.
• SD (SD indicator illuminated)
480i or 576i
• HD (HD indicator illuminated)
480p, 576p, 720p, 1080i, or 1080p
• RGB (RGB indicator illuminated)
640 x 480 through 1,920 x 1,200
* By default, [HD] is selected, and the unit is set to output 1080i.
* For more information on output formats, refer to "Main Specifications" (p. 63).
You can use the menus to change the output format. For more information about the menus, refer to "Menu Operations and
Menu List" (p. 47).
1.
Display the OUTPUT menu.
Go to the SETUP section and press the [OUTPUT] button to display the OUTPUT menu. The button lights up and an output-related
menu appears on the monitor.
fig.press-output-button.eps
2.
Select [FORMAT].
Use the [CURSOR] buttons to choose [PGM Format], then use the [VALUE] dial to change the output format.
fig.out-format-menu.eps
3.
Exit the menu.
Press the [EXIT] button to exit the menu.
fig.close-menu.eps
25