Saving Settings To Memory Buttons; Saving The Current Settings; Recalling Saved Settings - Roland V-1600HD Owner's Manual

Saving Settings to MEMORY Buttons

You can save the current settings to a MEMORY button. The V-1600HD's internal memory contains banks from 1 to 8, and up to 8
sets of settings can be saved in each bank, for a total of up to 64.

Saving the Current Settings

This saves the current state of the V-1600HD.
1.
Put the unit in the state you want to save.
Operate the dials and buttons on the panel to put the unit in the state you want to save. Also, use the menu screens to make the
various settings you prefer.
2.
Put the unit in standby for saving.
Press the [STORE] button to place the unit in standby for saving.
fig.save-memory.eps
3.
Select the bank to save to.
Go to the MEMORY section and press the [BANK] button. The button for the currently selected bank lights up. Choose a bank from
[1] through [8] to select the destination for saving.
fig.press-bank.eps
4.
Select the number to save to.
In the bank you selected in step 3, press the button [1] through [8] to select the destination for saving. Pressing any button saves
the data in internal memory.
Saving is performed only for items set to [ON] at [Memory Store Parameters] on the [SYSTEM] menu.
fig.select-button.eps

Recalling Saved Settings

Without pressing the [STORE] button, press the [BANK] button and select the bank number. You can call up saved settings by
pressing the button for the number you want to call up.
53