Connecting External Equipment; Connecting Source Equipment; Connecting Sdi Equipment - Roland V-1600HD Owner's Manual

Connecting External Equipment

Connecting Source Equipment

* To prevent malfunction or damage, always turn off the power on all devices before making any connections.
About Signal Formats
The signal formats listed below can be input to or output from the connectors of V-1600HD.
SDI
480/59.94i, 576/50i, 720/50p, 720/59.94p, 1080/50i, 1080/59.94i
Component
480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i,1080/59.94p,1080/50p
Analog RGB
640x480/60(*1), 800x600/60(*1), 1024x768/60(*1), 1280x768/60(*1), 1280x1024/60(*1), 1600x1200/60, 1920x1200/60(*2)
DVI-D/HDMI
480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p,
640x480/60(*1), 800x600/60(*1), 1024x768/60(*1), 1280x768/60(*1), 1280x1024/60(*1), 1600x1200/60, 1920x1200/60(*2)
Composite/S-Video
480/59.94i, 576/50i
* You can select 50Hz or 59.94Hz in [Frame Rate] of SYSTEM Menu.
The output refresh rate is 75Hz when Frame Rate is set to 50Hz.
*1
*2 Reduced blanking

Connecting SDI Equipment

Connect video cameras, video decks, and other SDI equipment to the SDI IN connectors. SDI input is assigned to channels 1
through 8.
fig.SDI-connection.eps
You can make either HD-SDI or SD-SDI connections to the SDI IN connectors. In cases when the aspect ratio of an input signal differs from the
output format, the output is letterboxed by default. You can also use the menus to select cropping or squeezing. Refer to "Menu Operations and
Menu List" (p. 47).
18