Span Mode - Roland V-1600HD Owner's Manual

Multi-Screen Modes

Span Mode

Using [Bus Structure] to select [Span] switches the unit to the span mode. This mode extracts just the horizontal center portions
of the video, then splits it in half outputting each half to each output. Source video at 16:9 is output as video at a wide 32:9 in the
span mode. In addition, you can adjust how the edges are blended using the menu setting.
PinP, KEY and DSK cannot be used in the Span mode.
fig.span-mode-image.eps
In the span mode, the internal signal flow is as shown below.
fig.span-mode-flow.eps
1 2 3 4
HD-SDI/SD-SDI (1:PGM)
DVI-D/HDMI (1:PGM)
1:PGM
60
1:PGM
5 6 7 8 9 10
Input Select
Left
Output Fade
2
2
11 12 13
Right
Scaler
HD-SDI/SD-SDI (2)
DVI-D/HDMI (2)
Still Image
Background Color
14
RGB/COMPONENT
SD (COMPOSITE/S-VIDEO)
PVW